Comparison between Different DPC Methods Applied to DFIG Wind Turbines

Seyed Mohammad Tavakoli, Mohammad Ali Pourmina, Mohammad Reza Zolghadri

Abstract


In this paper the direct power control methods of doubly fed induction generator in wind turbine applications are studied. In the methods under study, the proper voltage space vector of the rotor side converter is selected using a switching table which is derived from flux position and the difference between the measured and reference stator active and reactive powers. Various simulations are performed in Matlab/Simulink software on a DFIG system in order to investigate the dynamic performance and robustness of the proposed control methods against machine internal parameters variations.


Keywords


Direct Power Control (DPC); Doubly Fed Induction Generator (DFIG); Rotor Side Converter (RSC); Space Vector; Wind Turbine

Full Text:

PDF

References


L. Xu and W. Cheng, “Torque and reactive power control of a doubly fed induction machine by position sensorless schemeâ€, IEEE Trans. on industry applications, Vol. 31, No. 3, pp. 636-642, May/June 1995

N. P. Quang, A. Dittrich and A. Thieme, “Doubly fed induction machine as generator: Control algorithms with decoupling of torque and power factorâ€, Electrical Engineering 80 (1997), Springer- verlag 197, Vol. 80, No. 5, pp. 325-335, 1997

S. Peresada, A. Tilli and A.Tonielli, “Robust output feedback control of a doublyfed induction machineâ€, IEEE 25th annual conference on industrial electronics, Vol. 3, No. 1, pp. 1348-1354, November 1999

S. Muller, M. Deicke and R. W. De Doncker, “Doubly fed induction generator systems for wind turbinesâ€, IEEE Industry Applications, vol. 17, No. 1, pp. 26-33, May/Jun 2002

Chia Chi Chu, Chia Chun Hung, Yuan Zheng Lin and ZenJey Guey, “Universal field oriented rotor side controllers for doubly fed induction generatorsâ€, International Conference on Power Electronics and Drive Systems, pp. 342-347, 2009

K. Gierlotka and M. Jelen, “Control of double-fed induction machine using DTC methodâ€, in Proc. EDPE'03, pp476-481, September 2003, Slovakia

U. Baader, M. Depenbrock and G. Gierse, “Direct self control (DSC) of inverter-fed induction machine: A basis for speed control without speed measurementâ€, IEEE Trans. Industry Applications, Vol. 28, pp. 581-588, May/June 1992

Rajib Datta and V. T. Ranganathan, “Direct power control of grid connected wound rotor induction machine without rotor position Sensorsâ€, IEEE Trans. Power Electronics, Vol. 16, No. 3, May 2001

Lie Xu and Phillip Cartwright, “Direct active and reactive power control of DFIG for wind energy generationâ€, IEEE Trans. Energy Conversion, Vol. 21, No. 3, Sep 2006




DOI (PDF): https://doi.org/10.20508/ijrer.v3i2.680.g6162

Refbacks

  • There are currently no refbacks.


Online ISSN: 1309-0127

Publisher: Gazi University

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics);

IJRER has been cited in Emerging Sources Citation Index from 2016 in web of science.

WEB of SCIENCE between 2020-2022; 

h=30,

Average citation per item=5.73

Impact Factor=(1638+1731+1808)/(189+170+221)=9.24

Category Quartile:Q4